An Enhanced flight vision system (EFVS, sometimes EVS) is a system for imaging the external world from an aircraft, and to provide an image in which objects can be better detected. In other words, an EFVS is a system to provide an image which is better than unaided human vision. An EFVS includes sensors (one or many) such as a color camera, infrared camera or radar, and typically a display for the pilot, which can be a head-up display or head-down display. An EFVS may be combined with a synthetic vision system to create a combined vision system.
Maps, Directions, and Place Reviews
History
Night vision devices for military personnel have been operational since the time of World War II. Their use has been adopted also by military pilots, mainly in rotary-wing aircraft (helicopters). The use of such devices has been suggested for use by commercial pilots since the 1970s, but it was not until 1999 that the first commercial, FAA certified system, was airborne. Still, the pilot could not use the system to lower an aircraft below the required natural vision limit. In 2004, the FAA published correction 91-281 to landing guidelines, which allowed pilots to use the visual display provided by an EFVS to lower down to 100 feet above the landing zone (if no other restrictions apply). This marks the first time an EFVS gave a concrete commercial advantage over unaided vision.
Generation I EFVS
The first EVS comprised a cooled mid-wave infrared (MWIR) camera, or FLIR, by Kollsman. This, coupled to a HUD, was certified for flight with the Gulfstream V aircraft.
Airport LED transition and multispectral EFVS
EVSs are traditionally based on a Forward looking infrared camera which gives a thermal image of the world, and shows up heat released from airport approach lights. Most airports use incandescent Parabolic aluminized reflector lights, though energy efficiency standards (such as the Energy Independence and Security Act of 2007) have caused some airports to switch to LED lighting, which as a lower thermal signature.
However, since 2007 airports are switching to the more energy efficient LED lighting, which has a lower thermal profile. The new EVS designs are multispectral, to capture both visual light from LED lights and the thermal image of previous EVS generations. Future EVS designs focus on all-weather vision, which can be accomplished by intelligently fusing images and data from cameras operating in visible light, infrared, and millimeter-wave.
Vision Systems Video
Functionality
The main purpose of an EVS is to permit takeoff, landing and taxiing in poor visibility conditions, where landing would not be safe otherwise. An EVS is certified for landing by the FAA only if it is combined with a HUD, in which case it is called an EFVS.
The criterion for landing is known as decision height. ICAO defines Decision Height as "a specified altitude or height in the precision approach at which a missed approach must be initiated if the required visual reference to continue the approach has not been established." When a pilot in approaching the ground, they must see a visual reference to continue the approach. Visual references are for example the runway markings ("zebra stripes"), runway lighting, and approach lights (see runway for more examples). If the pilot cannot see such a reference in the decision height, they must abort the landing, and then circle for a second approach or land elsewhere.
Above the decision height, the pilot uses mostly the aircraft displays. Below decision height, the pilot must look outside to identify visual references. In this stage the pilot alternates between looking at displays and looking out the window. This switching can be avoided if a HUD is installed to display information to the pilot while also looking out.
Decision Height
The decision height minimum is defined by ICAO for the following distinct categories.
- Category I
- Category II
- Category III
- Category IIIa
- Category IIIb
- Category IIIc
Alternatives to EVS-assisted landing
Instrument landing system
An Instrument landing system, or ILS, relies on radio signals to allow operation in any weather. For an ILS landing to be allowed, the system must be installed on the ground, and a suitably equipped aircraft and appropriately qualified crew are required. Not all airports and runways are suitable for ILS installation, because of terrain conditions (hills in the way of the signal, non-straight landing slope).
GPS-assisted landing
While the GPS has a very high inherent precision, the reliability is not high enough for landing. GPS signals may be intentionally jammed, or lose integrity. In such cases, it may take the GPS receiver a few seconds to detect the malfunction, which is too long for critical flight stages. GPS can be used to lower the decision height below the unaided threshold, down to cat I decision height minima, but not lower.
Source of the article : Wikipedia
EmoticonEmoticon